WP 029 – Dingo (Call of Duty)

Description

WP 029 – Dingo (Call of Duty) – by LootBOX+

This is a resin SLA 3d printed add on for kits/toys. Printed using high quality ABS like resin.

Design for 1/100 and 1/144

WP 029 – Dingo from Call of Duty, size of each rifle are 61.3mm and 42.6mm. For 1/100 and 1/144 gundams and other scaled figures. This product contains 2 rifles [1/100 scale rifle, 1/144 scale rifle]

Note:

For rescaling, contact us through our socials.

Instagram: gxalhobbies.store

Whatsapp: +965 55776088

Email: gxalhobbies@gmail.com

# Post-Processing
• Handle with care! 3D-printed resin parts will break if excessively flexed, particularly at room temperature.
• Just like epoxy-based resin parts, these parts can be safely submerged in warm water to help with correcting warp.
• Part fitment may be tight in some areas. Trimming the pegs in question first will prevent issues. CA glue can be used to easily repair breaks or fill pits or holes.
• To smooth the layer lines present with 3D-printed resin parts, light sanding, followed by a surfacing primer should be used, when necessary.

# Health Disclaimer:
• Resin is dangerous when airborne. Proper safety gear, including a respirator with particulate filter should be worn when sanding resin parts.

# Copy-write and Fan-art Disclaimer:
• The preceding work presented here is a piece of fan art. I want to make it clear that I do not claim ownership of any intellectual property, characters, or original concepts depicted in this artwork. All copyrights, trademarks, and any other rights belong to their respective owners. Any resemblance to actual persons, living or dead, events, or locales is purely coincidental. If you are the rightful owner of any material depicted in this fan art and wish to have it removed or credited differently, please contact me, and I will promptly address your concerns. Thank you for understanding.